How To Make A Massage Soy Candle Or Spa Candle

When it comes to making candles there are quite literally thousands of books that are available to you on the subject. With so many books how can you tell which candle making book is right for you? Well, this all depends on what you are looking into, if you want some information on which book to choose out of all of the candle making books available then read on as this article is going to go over all of the basics.

If you want to try something beyond the standard aluminum mold, there are a number of options. One choice is polyurethane candle making molds. These are cheaper than their silicone cousins. They are flexible, but do not stretch that well. The polyurethane tends to have a strong aroma, and this sometimes gets into the candle. So, if you’re intending to make a scented candle, you do not want the aroma to be contaminated. But, if you use a releasing agent as with the aluminum molds, you can create some great pillar and taper candles.

Boiling bags, you can find these bags at almost any cooking supply store, they are great because they completely eliminate the cleanup process. All that you need to do when you’re done with them is throw the bag away.

A double boiler or a candle pour pot – If you are just starting out searching for soy wax Candle making team building supplies then and a double boiler is a great find. If you have some extra money to spare then invest in a candle pour pot as this is great for candle making purposes. If you do not have too much money to spare then you can always make your own double boiler. You can do this by using an empty soup can and a boiling pot. Use the boiling pot as the bottom pan and the soup can as the top pan.

Palm wax comes from palm trees it is clean burning and has a nice natural scent. If you heat palm wax to 200 degrees and pour it into a heated container and then cover the container with something like a small cardboard box to retain the heat your palm candles will have a nice crystalline pattern. So this is a good candle making wax if you use this procedure.

Step # 1. To start the gel candle making process the first thing that you are going to want to do is to choose a work area. Choose a place that is flat, level, and that will not be disturbed by pets or children. Cover this area with newspapers.

If you aren’t exactly sure on size, just cut a little bit off of the pumpkin so that it is level, then rest the tea light on top and trace around it. This will give you a good indication of the exact size area that you need to cut. Cut straight down then just chisel out inside the circle with a screwdriver, butter knife, or an actual chisel. Remember: safety first! Please be careful whenever using anything sharp. Once you have the area chiseled out for the tea light, drop it in and light. These make great gifts of the neighbors, or you can set up out along your driveway on trick or treat night.

Now melt the wax, do this by cutting the wax in to chunks and placing these chunks in the top pot of the double boiler, fill the bottom pot half way up with water. Make sure that you stir often and check the temperature as well, the wax should be ready between 150 degrees and 190 degrees. When this is done pour the wax in to the mold, however, right before you do this add the scent and mix in well. When it comes to scented candle making you are always going to want to add the scents right before you pour the wax in the mold. When the wax is in the mold simply put it to the side to dry for 24 hours. When this time has passed remove the candle from the mold and trim the wick to about a quarter of an inch, you are all done with scented candle making!